[aladdin]

Hi,

I have installed nzbget through etrayz application installer. nzbget and its webgui seems to work fine but I get several errors from time to time with all nzbs I tried. Here are some examples:

-Could not receive data on socket: ErrNo 11, Resource temporarily unavailable
-Could not read from TLS- socket: cannot read from TLS connection: a protocol violating EOF occured
-Could not read from TLS- socket: cannot read from TLS connection: the operation timed out

Hope you have a better idea than me. I have tried to lookup my DNS but seems to work with no problem. Appreciate your help.

[FlemmingK]

Error executing commands!

/etc/init.d/nzbget start
-> Starting NZBGet.
-> ...FAILED!

Error starting program

Installed with Appinstaller 2.03

FlemmingK

[TheHijacker]

First of please next time post in correct forum.

And to solve this problem type in SSH:

ldconfig

Then try to start the process again from Installer.

[FlemmingK]

Hello

I got NZBGet running on my eTrayz and managed to download a few files.
The last download was incomplete, so I tried to use the same NZB again.
The web-gui shows "server is sleeping".
Which server would that be?
What can I do?

Any manual or help file for NZBGet?

FlemmingK

[mccar75287]

FlemmingK said:

Any manual or help file for NZBGet?

FlemmingK

The best place to get this would be from the developers web site.
See here:
NZBGet Support

[TheHijacker]

I think duplicated nzbs are disabled by default.

And please post in proper topic/forum.

[Rafael]

Just want to say that this program is GREAT! I use my full speed, and it MUCH LIGHTER than sabgnzb.

[TheHijacker]

C++ apps are faster then python, php or perl. Thats a fact.

[FlemmingK]

Hi

Runnung nzbget on eTrayz.
I've been downloading a number of files with nzbget. Normally it works fine.
With very large files (+20GB) it starts to give a TLS/SSL error.
Normally I just have to restart nzbget, then I get the last few MB in no time.
To day, however, the web server stopped working, and I had to reinstall the OS (v1.05). That went fine.
When I started the installer, I was prompted to install v 2.04 and did so.
The installer shows nzbget as installed but it won't start. Also it won't uninstall.
With putty I found that nzbget was gone from /etc/init.d.
I guess that I need to remove nzbget from the installer's installed list, but how do I find that?
Should I go back to installer 2.03, and is that still available?

Please advise!

FlemmingK

[TheHijacker]

Type:

rm /home/epkg/bin/nzbget

Then you will be able to reinstall.

[FlemmingK]

TheHijacker, on 31 August 2010 - 07:24, said:

Type:

rm /home/epkg/bin/nzbget

Then you will be able to reinstall.

Thanks Hijacker
That worked, and nzbget continued my download beautifully.

Do you have any idea why I get the TLS/SSL error? Or should i post the problen on sourceforge.net?

Best regards
FlemmingK

[TheHijacker]

Sorry I wouldn't know the answer to that one. I never used SSL even on SABnzbd since its too slow. And nzbget I never used only to test the APP Installer package when I made it.

Post the error on their homepage. Maybe you get a solution.

[daniello]

As a matter of fact I don't know if it downloads twice .. but I think it unpacks twice .. I am not sure. Ultimately I find two directories (named differently) containing exact same files.

Has anyone else experienced this before?

[daniello]

I did some speed testing and I am not too happy with the results. SSL is obviously a real speed killer.

No downloading: CPU 50%-60% (which is already high .. don't know why).
Downloading with SSL: CPU 100% dl rate about 600-800 K
Downloding without SSL: CPU 97-100% rate about 1500-2500 K

Playing with "simultaneous connections" doesn't help.

Sabnzbd runs at half speed - as I understood this is a Python vs. Binary issue.

I guess there is not much room for improvement but .. any feedback or suggestions on how to improve speed is/are very welcome.

Cheers

[daniello]

daniello, on 08 September 2010 - 13:46, said:

As a matter of fact I don't know if it downloads twice .. but I think it unpacks twice .. I am not sure. Ultimately I find two directories (named differently) containing exact same files.

Has anyone else experienced this before?

I think this happens when there is an nzb file in the archive (this is often the case). If that is the case I don't understand why it is processed - since it is not in the correct folder.
.. under further investigation ..

[TheHijacker]

Doesn't seem to be any new updates for nzbget. On other hand SABnzbd is contantly updated. It's still my preffered usenet client.

[daniello]

TheHijacker, on 11 September 2010 - 19:01, said:

Doesn't seem to be any new updates for nzbget. On other hand SABnzbd is contantly updated. It's still my preffered usenet client.

I like SABnzbd much more too .. but it's too slow.

[daniello]

In nzbget.conf I find the line:

PostProcess=/home/epkg/bin/postprocess.sh

There is no share "epkg" on my etrayz and I can't find the script postprocess.sh anywhere.

Curiously enough postprocessing is working though.

I thought nzbget uses the example script

\home\sysadmin\WWW\nzbgetweb\postprocess-example.sh

But since the conf file doesn't point to it I guess I was wrong.

Can anybody please shed some light? I basically need to make an edit .. but since I obviously have been editing the wrong script all the time - no wonder it doesn't work.

[TheHijacker]

Both files are there.

mcedit /home/epkg/bin/postprocess.sh

[daniello]

TheHijacker, on 13 September 2010 - 05:17, said:

Both files are there.

mcedit /home/epkg/bin/postprocess.sh

Ah .. I'll have to telnet my Etrayz .. I'll try that tonight.

Is there any chance I can get this as a windows share .. to access it directly?

Please be cautious with me .. I have never dealt with Linux more than I had to.