[TheHijacker]

Yes. Disable version checking in settings.

[TheHijacker]

Updated it to todays 468 release. Please test it. Make backup!

[hogm]

TheHijacker, on 06 December 2010 - 13:52, said:

Updated it to todays 468 release. Please test it. Make backup!

Updated; all seems to be working fine, just one issue the script to stop the service from App Installer leaves one service up so it never shows as stopped, i had to go in via ssh and stop it manually then i was able to upgrade.

After upgrade it showed a message that it was an unknown version and to update it, i did, restarted it from the App Installer and it is working so far. It actually is running faster than before.

Thanks...

[TheHijacker]

I too noticed that it runs faster.

As for not beeing able to stop it. The command that kills the process will stop SickBeard gracefully meaning it will not force kill it but just send the command for it to properly shutdown. And this can take few seconds. If APP Installer refreshes too quickly, that is before the SickBeard has fuly stopped, he will still show it as running.

I'll add in next package version a simple sleep command after I send the kill process command so that APP Installer will wait a little before he refreshes the status.

I also screwed up the file naming. It is fixed now. You can delete sickbeard.alpha.build468* in /installer/epkg manualy then unzip this files to same folder:

http://epkg.xtreamer....build468-1.zip

Or just do the upgrade if he shows it can be done.

Sorry about this.

[pug306d]

I updated to this new version fine, I noticed its much faster now

One problem is though with each upgrade my /home/epkg/usr/local/share/sickbeard/autoProcessTV/autoProcessTV.cfg file is lost, could you save this file as part of the backup?

Also I'm getting this error for my Nzbmatrix feed in the Sickbeard error log:

Error trying to load NZBMatrix RSS feed: mismatched tag: line 64, column 68

Anyone else using NZBMatrix and getting this error? I can't find much info about the exact error but similar errors have been caused by code changes in sickbeard so I'm hoping the next update may fix this...

[mad_vtak]

i Gave an EDU before but i think the TS deleted the thread.

Now i need an EDU on why this isnt working.

Quote

I started my server from scratch today, reinstalled sick beard the version I use is "alpha master" I've added the shows I watch, that part is all good, it creates the folder with nothing in there. The other version I used use to add the "fan art" and thumbnail for my streamer. That didn't happen. I created a back log of shows I missed during the week. The show downloads fine in SABnzbd, but when it done all he'll breaks loose.

The show "How I Met Your Mother" has a folder, inside does not show the current season, and the folder is also empty. Back out to the root of my tv shows, there is the show folders, and then the download episode from SB. I checked " keep Original files" is not checked. And the worse thing, out of the 3 episodes I've downloaded there is the main folder and then Three other folders that say show name x season x episode number. Ohh yeah, but the episode name has not changed like i asked it to.

Please halp!

Here is a quick log of Bones

Jan-23 04:11:38 INFO SHOWQUEUE-REFRESH :: Writing show nfo file to /home/Public/eDownloader/TV/Bones/series.xml
Jan-23 04:11:19 INFO SHOWQUEUE-REFRESH :: 75682: Loading all episodes with a location from the database
Jan-23 04:11:19 INFO SHOWQUEUE-REFRESH :: 75682: Loading all episodes from the show directory /home/Public/eDownloader/TV/Bones
Jan-23 04:11:19 INFO SHOWQUEUE-REFRESH :: Performing refresh on Bones
Jan-23 04:11:16 WARNING SHOWQUEUE-FORCE-UPDATE :: Unable to add TVRage info: Show is already in database, not adding the TVRage info
Jan-23 04:11:14 INFO SHOWQUEUE-FORCE-UPDATE :: Checking the last aired episode to see if the dates match between TVDB and TVRage
Jan-23 04:01:46 INFO SHOWQUEUE-FORCE-UPDATE :: 75682: Loading all episodes from theTVDB...
Jan-23 03:52:00 INFO SEARCHQUEUE-RSS-SEARCH :: No needed episodes found on the RSS feeds
Jan-23 03:51:50 INFO SHOWQUEUE-FORCE-UPDATE :: Loading all episodes from the DB
Jan-23 03:51:42 INFO SEARCHQUEUE-RSS-SEARCH :: Clearing NZBMatrix cache and updating with new information
Jan-23 03:51:41 INFO SEARCHQUEUE-RSS-SEARCH :: Searching all providers for any needed episodes
Jan-23 03:51:41 INFO SEARCHQUEUE-RSS-SEARCH :: Beginning search for new episodes on RSS
Jan-23 03:51:41 INFO SEARCHQUEUE-RSS-SEARCH :: Changing all old missing episodes to status WANTED
Jan-23 03:51:40 INFO SHOWQUEUE-FORCE-UPDATE :: 75682: Loading show info from theTVDB
Jan-23 03:51:40 INFO SHOWQUEUE-FORCE-UPDATE :: Beginning update of Bones

This is what it looks like


This is the Log in SABnzbd


Post Processing from Sick Beard


Gerneral config in Sick Beard

[epox]

well you got me lost.
what is it your tring to do?

mark

[crazyhorse69]

Hi,

I've just re-installed firmware 1.07 from scratch, leaving the Data partition intact.

I've re-installed all apps so far without problem, but i'm having a little trouble with sickbeard.

I've installed build473-1, but whenever I try to start it, it says starting but doesn't actually start.

I have Python installed, and have uninstalled sickbeard several times and i've also tried the older version build 468-1 and the results were the same for that one as well.

Can anyone help with this.

Many thanks

[TheHijacker]

Try to start it manualy in SSH (Putty) with this:

/home/epkg/bin/python /home/epkg/usr/local/share/sickbeard/SickBeard.py

And look for errors.

[crazyhorse69]

TheHijacker, on 14 February 2011 - 07:56, said:

Try to start it manualy in SSH (Putty) with this:

/home/epkg/bin/python /home/epkg/usr/local/share/sickbeard/SickBeard.py

And look for errors.

Thanks for that, I started it manually just like you said and it worked first time.

Cheers

[pven]

Can you please update Sick Beard? As of 480 there are some nice improvements.

[TheHijacker]

Ugh. A bit busy. Maybe later. Definetly over the weekend.

[pven]

Thanks! Take your time, the 'old' version is still working great.

[JeanMarre]

Hello!
First, thanks for everything !! This Installer APP is just wonderfull and it really changed my etrayz.
Second, I have a trouble with SickBeard in the lastest version (build 473-1). It seems that there is no way of removing a show. This was possible in the previous versions. I'm going to change to the previous version but I was wondering if everybody had the same issue.
Again, thanks for all the work !

[crazyhorse69]

JeanMarre, on 20 February 2011 - 19:44, said:

Hello!
First, thanks for everything !! This Installer APP is just wonderfull and it really changed my etrayz.
Second, I have a trouble with SickBeard in the lastest version (build 473-1). It seems that there is no way of removing a show. This was possible in the previous versions. I'm going to change to the previous version but I was wondering if everybody had the same issue.
Again, thanks for all the work !

Hi,

If you just click the show when you are on the page where it lists all your shows, once it brings it up, you then have the option along the top to delete it.

[JeanMarre]

crazyhorse69, on 20 February 2011 - 20:17, said:

Hi,

If you just click the show when you are on the page where it lists all your shows, once it brings it up, you then have the option along the top to delete it.

Hi,
I changed the version to 468-1 and the option is now available. On which version are you?
I'm checking my version with the Installer APP.

[crazyhorse69]

JeanMarre, on 20 February 2011 - 20:50, said:

Hi,
I changed the version to 468-1 and the option is now available. On which version are you?
I'm checking my version with the Installer APP.

Hi,

I use version 473-1

[JeanMarre]

I just reinstalled the latest version and the delete option is now re available... Don't know what happend but thanks for the help !

[TheHijacker]

Uf. Sorry for delay. Been very busy with new project (you guys will love it).

I updated SickBeard to build 480 (it says 479 on WebGUI but that is incorrect. I used proper latest sources https://github.com/m...ball/build-480.

Give it a try.

[JeanMarre]

Thanks for the update !
Any clues about the new project ???